- Technical Specifications
MONOPOLAR WATTS VPEAK MAX VOLTAGE CREST FACTOR (TYPICAL) FREQUENCY (KHZ) Cut I 200 1000V 1.7 ± 20% 490 kHz ± 4.9 kHz Cut II 200 750V 1.7 ± 20% 490 kHz ± 4.9 kHz Blend (1) 200 1320V 1.8 ± 20% 490 kHz ± 4.9 kHz Blend (2) 200 1475V 2.0 ± 20% 490 kHz ± 4.9 kHz Blend (3) 200 1650V 2.2 ± 20% 490 kHz ± 4.9 kHz Blend (4) 200 1870V 2.4 ± 20% 490 kHz ± 4.9 kHz Pinpoint Coagulation 120 1800V 3.1 ± 20% 490 kHz ± 4.9 kHz Spray Coagulation 120 4000V 6.0 ± 20% 350 to 450 kHz Gentle Coagulation 120 450V 1.6 ± 20% 490 kHz ± 4.9 kHz BIPOLAR WATTS VPEAK MAX VOLTAGE CREST FACTOR (TYPICAL) FREQUENCY (KHZ) Macro Bipolar 80 600V 1.5 ± 20% 490 kHz ± 4.9 kHz Micro Bipolar 80 500V 1.5 ± 20% 490 kHz ± 4.9 kHz Standard Bipolar 50 250V 1.5 ± 20% 490 kHz ± 4.9 kHz
Technical Specifications:- Lifespan: Reusable
- Sterilization Status: Non-sterile
Electrical Specifications:- Cooling System: Passive Cooling
- Technology: Isolated RF Output
- Audible/Visible Output Meter: Yes
- Pre-set Feature: Yes
- Monopolar HP Ports: 2 Port(s)
- Connector Ports/Power Switch: White
- Contact Monitoring Systems Range/Trip Point: 10 ohms or less over entire operating range (10C° to 40°C)
- Dual Activation Tone Alert: Yes
Safety Specifications:- Latex-Free: Yes
- Included ItemsSKUNameDefault Quantity
A2350 Bovie® Surgi-Center Pro High Frequency Electrosurgical Generator 1 ESPR2 Reusable Electro-Surgical Pencil, 100 Autoclaves 1 A1204P Grounding Plate A1200 1 A1254C Dispersive Electrode Cable For Reusable Plate 1250/2100 1 - Resources
- Features
ENERGY SETTINGS
CUT
Cut I
A general cutting with a standard RF waveform used in open and endoscopic surgical procedures, Cut I is for use in a wide range of tissue with minimal hemostasis.
Cut II
Tailored specifically for Laparoscopic procedures, Cut II offers a precisely managed cutting energy that limits output for minimizing the potential risk of capacitive coupling and alternate site burns due to weakened insulation.
Blend (Level 1, 2, 3 & 4)
Blended cutting offers varying levels of hemostasis during a cut procedure providing increased control of bleeding at the surgical application site.
- Level 1: 75% Duty Cycle
- Level 2: 62.5% Duty Cycle
- Level 3: 50% Duty Cycle
- Level 4: 37.5% Duty Cycle
COAGULATION
Pinpoint
A general coagulation mode delivering rapid desiccation effects with minimal tissue damage.
Spray
Recommended for hemostasis in highly vascular or large surface areas and for non-contact tissue coagulation to control superficial bleeding. Spray mode permits dual, simultaneous activation of two monopolar accessories with audible dual activation tone alert.
Gentle
Gentle mode offers more concentrated coagulation than in other modes. When coagulation is necessary in short amounts of time, reduced electrode carbonization is provided.
- Overview
SPECIALIZED LAPAROSCOPIC MODE
Bovie’s Cut II is tailored specifically for Laparoscopic procedures. The mode offers a precisely managed cutting energy that limits output thereby minimizing the potential risk of capacitive coupling and alternate site burns.
DUAL MONOPOLAR SPRAY ACTIVATION
The Bovie 2350-V offers simultaneous activation in spray with audible activation tones. The simultaneous delivery produces equal and even power outputs in each accessory, for a safer delivery of dual monopolar energy.
ADJUSTABLE POWER DURING ACTIVATION
The power can be adjusted up or down in variable steps while performing a procedure, to increase procedural efficiency and provide the appropriate amount of power to the surgical site.
SURGICAL MEMORY TECHNOLOGY
The 2350-V recalls the last used power and mode. The surgeon can store 10 user-defined RF presets for easy recall.
PATIENT SAFETY FEATURES
- Bovie FDFS™ – The tissue sensing technology measure tissue 5 million times a second and adjusts to varying impedances 5000 times a second for accurate energy delivery.
- Automatic system self-checks upon powering up the unit.