• Cart{0} items in cart

Bovie® DERM 102 Desiccator

Part # DERM 102
DERM 102 on Wall A805 cc wFeather 2016 Bovie Logo copy
DERM 102 on Wall A805 cc wFeather 2016 Bovie Logo copy
QTY
Add to List
  • Technical Specifications
    MODE OUTPUT
    POWER    		 OUTPUT
    FREQUENCY    		 REPETITION
    RATE    		 CREST FACTOR @
    RATED LOAD    		 VP-P
    Coagulation 10 W @ 1000Ω 550 kHz ± 44.9 kHz 19.5 kHz ± 10% 10.0 ± 20% 3.3 kV
    Bipolar 10 W @ 150Ω 550 kHz ± 44.9 kHz 19.5 kHz ± 10% 10.0 ± 20% 1.0 kV

    Technical Specifications:
    • Lifespan: Reusable
    • Sterilization Status: Non-sterile

    Electrical Specifications:
    • Main Voltage: 100 – 240 VAC ± 10%
    • Main Frequency: 50 – 60 Hertz
    • Main Current: 320 mA Max.
    • Power Consumption: 28 VA
    • Basic Construction: EN 60601-1
    • Mode of Operation: Intermittent Operation
    • Output Type: TYPE BF
    • Duty Cycle: 10sec on / 30sec off
    • Main Fuses: T 400mAL, 250V

    Safety Specifications:
    • Latex-Free: Yes
  • Included Items
  • Resources
    Catalogs: IFUs:
  • Features
    Derm 101 and 102

    INTERFACE

     
     

    A) POWER SWITCH

    Turn the unit power on utilizing the switch on the right side panel of the unit.

    B) POWER OUTPUT DIAL

    Set the power output either by using the dial on the front of the unit (B) or on Bovie DERM 101/102 unit only by the up and down buttons on the handpiece (F). When power level adjustment is being made by the handpiece an audible tone will sound to indicate that the power level has been changed. Depressing and holding the up or down buttons will cause the power settings to change more rapidly for quick adjustment of the output settings. Power output is displayed in “.1” watt increments from 0.1 to 10 watts.

    NOTICE: The output settings can not be adjusted when the unit is being activated.

    C) ACTIVE LIGHT

    When the unit is activated, an audible tone is sounded and the blue active light will illuminate.

    D) STANDARD ELECTRODE

    Slide the standard electrode into the handpiece until it is firmly seated. The handpiece will accept most standard 3/32″ electrodes.

    E) ACTIVATION BUTTON

    To activate the unit, remove the handpiece from the holder. Place the handpiece in the desired position and depress the activation button.

    F) POWER OUTPUT BUTTONS

    Set the power output by pressing the up and down buttons on the handpiece.

     

    G) MONOPOLAR OUTPUT RECEPTACLE

    The monopolar output for the handpiece is on the lower left front of the unit. The handpiece plug is designed to fit in only one direction. Plug the connector from the handpiece into the receptacle on the bottom of the unit. The three button handpiece is designed to give the doctor complete fingertip control of the power output settings.

    H) GROUNDING PLATE OUTPUT RECEPTACLE

    To use the optional grounding plate with cord (A802EU), insert the plug of the cord into the grounding plate output and connect the other end into the grounding plate. The plate should be placed underneath the patient at a point where the entire plate is covered by bare skin. The use of conductive gel is recommended.

    I) BIPOLAR OUTPUT RECEPTACLE (DERM 102 only)

    To use the optional bipolar cord (A827V), insert the pins into the bipolar outputs. The cord is then plugged into the forceps. A sliding gate behind the monopolar and bipolar outputs prevents the user from using both simultaneously.

    J) POWER CORD

    Plug the female end of the power cord into the base of the unit.

    K) FOOTSWITCH OUTPUT RECEPTACLE

    The optional footsw

  • Overview

    The DERM 102 High Frequency Desiccator offers ten watts of monopolar power, adjustable in 1/10th watt increments, to desiccate and fulgurate tissue. The power can be adjusted using the 3-Button Power Control Handpiece, A902, (Patent #8,998,899) or using the rotary dial on the unit. The unit features a large, bright, LED display for excellent visibility across the procedure room. If foot control activation is preferred while using the Derm 102, just plug in the A803 Bovie Footswitch (sold separately) and activate. No separate handpiece is required.

    For the practitioner who wants to also use bi-polar electrosurgery along with high frequency desiccation, the DERM 102 High Frequency Desiccator provides 10 watts of bipolar power, adjustable in 1/10th watt increments. To utilize this feature the A827V* bipolar cable, a bipolar forcep* and footswitch activation are required.

    The DERM 102 is packaged ready to use. The units come with a total of 18 disposable dermal tips. By the time the practitioners utilizes all 18 electrodes, they will have paid for the unit, twice, and generated income for their practice.

     

    FEATURES DERM 102
    Power 10W
    Desiccation X
    Fulguration X
    Bipolar (utilizes A827V* bipolar cable) X
    1/10th Watt Power Adjustment X
    Universal Power X
    Foot Control Setup (utilizes A803* footswitch) 1 step
    Foot Control Handpiece Required No
     

    *Sold Separately